When installing a new lavatory it's easier to install the faucet and drain before installation. If you are replacing an old faucet, then figure 3 will be helpful in removing the old faucet. In either case refer to the specific manufacturers installation instructions packed in with the faucet you just purchased.

1) Place gasket (A) on top of lavatory and place plumbers putty around gasket. Set faucet in place.

(2) Install pop-up lift rod (G) through hole in rear of faucet

(3) Install mounting washers (B) then thread hex nuts (C) (some can be plastic or metal) onto the faucet shanks and, after positioning the faucet, tighten mounting nuts firmly.

(4) Save the supply nuts (M) for attaching the supply line.

Privacy Policy    Terms of Use